If your above ground swimming pool liner bead resembles an upside down letter ‘U’ or ‘J’ than you have a U/J Bead type liner application.This type of liner is installed by hanging it directly to the top of the pool wall edge, which is commonly (but not in all cases) secured using a top track and or stabilizer tube. Note: Liner will accommodate any flat bottom above ground pool and any pool bottom gradually dished to a maximum of 8 inches in the centre. This liner will not function with an expandable bottom/deep end.
Note: Liners are designed to “Standard Specification“ which will fit to the true size stated in the description. Be certain to measure your pools dimensions properly to ensure a proper fit. Tip: Measure from wall to wall for proper length, width and height.
Due to the nature of various monitors, video cards and settings, colours shown on the site may vary slightly.
Aucun post trouvé
Clients ont également acheté