Solid Safety Cover Patches

Repair holes and tears in your Cantar Lite Solid or Hyper Lite Solid safety pool covers with Cantar Cover Doctor Safety Cover Repair Patches, a self adhesive safety cover patch kit. Each kit contains one 8.5" x 11" self adhesive repair patch that can be cut into multiple smaller patches.

Instructions:

1. 1) Thoroughly clean area on both sides of the cover that will be patched. It is important to make sure the area is completely dry before applying the patch.
2. 2) Trim any loose threads around the hole so the patch will lay flat.
3. 3) Cut the patch so it will overlap the hole by 1” all the way around and round off all corners on the patch.
4. 4) Lay cover on a flat solid surface.
5. 5) Remove backing from self-adhesive patch and apply to the cover by pressing firmly and work across to remove wrinkles and air pockets.

For best results, apply a second patch to the backside of the cover by repeating the steps above.

WARNING:  Holes and tears greater than 3” should NOT be patched. For use on Cantar Lite Solid and Hyper Light Solid Safety Covers only.