Eclipse3 Algaecide (4 Kg)

Eclipse3 is an all-natural mineral treatment for pools, spas and hot tubs. Eclipse3 has been proven to perform extremely well in three main areas; it eliminates algae growth and reduces your use of chlorine, clarifies the water while maintaining a proper pH level, and can reduce your electrical operating costs by as much as 66%.

When used as directed, Eclipse3 helps pool and spa owners maintain a healthier, cleaner and more natural way of enjoying their investment and leisure time.

Eclipse3 Features:

• 4 Kg Container
• offers pool and spa owners a mineral-based, natural way to combat algae and bacteria growth
• eliminates the tedious daily routine usually associated with pool and spa maintenance
• allows pool and spa owners to add less chlorine and bromine and still maintain crystal clear water in their pool or spa reduces the need for vacuuming
• saves on pool and spa chemical costs – by as much as 60%
• saves on electrical costs by as much as 66 % - you only need run your pump and filtration system for as little as 8 hours a day
• eliminates worries about strong chemical odors, irritation of the skin and eyes, bleaching of hair and is environmentally-friendly
• is safe for pool liners and has no erosion effects on filtration system parts

Directions for use:

First determine pool volume:

Circular = Diameter x Diameter x Avg. depth x 786

Oval = Max Length x Max Width x Avg. depth x 786

Free form = Surface Sq. m. x Avg. depth x 1000

Rectangle or square = Length x Width x Avg. depth x 1000

For start-up:

• Shock treat pool with chlorine or bromine following the supplier's recommended label rate
• Balance water alkalinity in the range of 80-150 ppm
• Maintain ph between 7.2 and 7.6
• Add 57g of eclipse3 per 4000L of pool water; use measurring cup provided in pail
• After treatment run filtration system continuously for 48 hours; backwash at 12 hour intervals
• Vacuum after 24 hours to remove any sediment collected by eclipse3
• One week after treatment, continue using eclipse3 as directed by the weekly applications instructions

Weekly Application: Copper levels should be 0.5-1ppm. When copper level drops below 0.5 , eclipse3 must be added (3.5g per 1000) until the required concentration is obtained. Once the required level is reached, run filtration system for 8 hours daily.

Notes:

1. ONLY use measuring cup provided with eclipse3

2. Distribute eclipse3 close to the surface near discharge jets to reduce the risk of staining accessory surfaces

3. Daily monitoring of chlorine/bromine may be needed during periods of heavy traffic and high temperature

4. When having water tested, copper reading of .05- 1ppm should be obtained

5. This product does not contain any bleaching agents to remove stains

Warranty Coverage: Eclipse3 Chemicals come with a 30 Day Limited Manufacturers Warranty.

Start a Warranty Claim:To begin a claim please email customerservice@poolsuppliescanada.ca with a photo showing the defect(s)/issue with your Eclipse3 Chemical and include a brief explanation of what occurred.