Step 1 of 19

Hot Tub Cover Colour

Almond

Ash Grey

Black

Brown

Burgundy

Charcoal

Chestnut

Hunter Green

Light Grey

Mahogany

Navy

Sky Blue

Tan

Teal

NOTE: colour samples may appear different then actual product based on monitor and configurations

Step 2 of 19

Dimension A

Maximum Length 96" (or additional fees will apply)

Step 3 of 19

Dimension B

Maximum Length 96" (or additional fees will apply)

Step 4 of 19

Dimension C

Step 5 of 19

Fold Direction

Cut A in half

Cut B in half

Step 6 of 19

Foam Density

Step 7 of 19

Skirt Length

The skirt on a hot tub is a useful aesthetic feature which gives a tidy finish to the look of the hot tub when it is closed and assists in protecting the the outer lip of the spa from damage due to heat build up by allowing heat loss. If it is not measured correctly it will bunch up and push your spa cover open. A shorter skirt is generally a good idea in terms of maintenance and simply closure for spa covers. If you have wood rails then measure from the top of the wood rail to the top of the spa acrylic and subtract 1/4 inch to prevent bunching. If you do not have a wood rail then measure from the top of the spa to the bottom of the spa lip and add 1/2 inch.

Step 8 of 19

Vapour Barrier

A hot tub vapour barrier consists of a thick plastic that is heat sealed around the foam inserts on a hot tub or spa cover and prevents water from getting into the foam inserts.

Step 9 of 19

Add a Full Centre Cover Hinge Insulating Seal

Add a full hinge insulating seal to your hot tub cover; this upgrade dramatically reduces heat loss.

Step 10 of 19

Straps

Step 11 of 19

Strap Length

When measuring your strap length, start from the base of the cover and measure down to the top of the buckle - include your skirt measurement in the final number.

Step 12 of 19

Strap Location From the Corner

Measure from the edge of your spa inwards to the first strap - this is the Strap Location. If you're not sure, attach a drawing or sketch of your dimensions below. Note: straps cannot be centered on the sides that are cut in half for your fold.

Step 13 of 19

Handles

Step 14 of 19

Handle Location

Select N/A if you are not ordering handles for your hot tub cover. If you would like your handles in the standard position for your shape of cover, select "Manufacturer Standard Location". Otherwise, select "Custom Location" and specify the location of the handles, in inches, from the edge of the cover in the Special Instructions field below.

Step 15 of 19

Hot Tub Manufacturer

Important Note: Entering your hot tub make and/or model does not guarantee your cover will fit; always double check your measurements to ensure they are accurate prior to ordering.

Step 16 of 19

Hot Tub Model

Important Note: Entering your hot tub make and/or model does not guarantee your cover will fit; always double check your measurements to ensure they are accurate prior to ordering.

Step 17 of 19

Add Metal Lifter Plates

Step 18 of 19

Expedited Production

Guarantee that your new hot tub cover is produced and delivered to you in just 4-6 weeks!

Step 19 of 19

I Confirm My Provided Cover Details Are Accurate (Enter Name)

Enter your name above to digitally sign off on this form.