Key Features:

• Enhanced Bonding: Prepares the surface of PVC, CPVC, and ABS pipes and fittings for better bonding.
• Fast-Acting: Works quickly to clean and prime the pipe surface for immediate solvent cement application.
• Durable: Provides long-lasting bonds that are essential for strong, leak-proof plumbing systems.

Steps for Use:

1. Prepare the Surface: Ensure that both the pipe and fitting are clean and free of dirt, grease, or other contaminants.
2. Apply the Primer: Using the applicator or a clean brush, apply a thin, even layer of the Primer to both the pipe and fitting.
3. Wait for the Primer to Dry: Allow the primer to dry for a few seconds before proceeding. It should be tacky to the touch.
4. Apply Solvent Cement: Immediately after applying the primer, apply the appropriate solvent cement for your pipe material (PVC, CPVC, or ABS). Work quickly as the cement bonds instantly.
5. Join the Pipe and Fitting: Insert the pipe into the fitting and give a slight twist to ensure even coverage. Hold the joint for a few seconds to secure it.
6. Allow to Cure: Let the joint cure for the recommended time, usually 15 minutes for a temporary hold, before handling. Full strength is reached after 24 hours.

Warranty Coverage: The Weld-On IPS P-68 Primer comes with a 30-day limited manufacturer’s warranty. The manufacturer warrants this product against defects in material or workmanship. The warranty is void if the product is misused, improperly applied, or exposed to extreme temperatures. This warranty does not cover labor charges or any damages resulting from the installation process.