Premium Left or Right Cut Corner Square or Rectangle Hot Tub Cover (5 - 3 Inch Taper)

NOTE: colour samples may appear different then actual product based on monitor and configurations

Maximum Length 96" (or additional fees will apply)

Maximum Length 96" (or additional fees will apply)

Maximum Length 96" (or additional fees will apply)

Maximum Length 96" (or additional fees will apply)

Maximum Length 96" (or additional fees will apply)

The skirt on a hot tub is a useful aesthetic feature which gives a tidy finish to the look of the hot tub when it is closed and assists in protecting the the outer lip of the spa from damage due to heat build up by allowing heat loss. If it is not measured correctly it will bunch up and push your spa cover open. A shorter skirt is generally a good idea in terms of maintenance and simply closure for spa covers.

If you have wood rails then measure from the top of the wood rail to the top of the spa acrylic and subtract 1/4 inch to prevent bunching.

If you do not have a wood rail then measure from the top of the spa to the bottom of the spa lip and add 1/2 inch.

A hot tub vapour barrier consists of a thick plastic that is heat sealed around the foam inserts on a hot tub or spa cover and prevents water from getting into the foam inserts.

Add a full hinge insulating seal to your hot tub cover; this upgrade dramatically reduces heat loss.

When measuring your strap length, start from the base of the cover and measure down to the top of the buckle - include your skirt measurement in the final number.

Measure from the edge of your spa inwards to the first strap - this is the Strap Location. If you're not sure, attach a drawing or sketch of your dimensions below. Note: straps cannot be centered on the sides that are cut in half for your fold.

Select N/A if you are not ordering handles for your hot tub cover. If you would like your handles in the standard position for your shape of cover, select "Manufacturer Standard Location". Otherwise, select "Custom Location" and specify the location of the handles, in inches, from the edge of the cover in the Special Instructions field below.

Important Note: Entering your hot tub make and/or model does not guarantee your cover will fit; always double check your measurements to ensure they are accurate prior to ordering.

Important Note: Entering your hot tub make and/or model does not guarantee your cover will fit; always double check your measurements to ensure they are accurate prior to ordering.

Guarantee that your new hot tub cover is produced and delivered to you in just 4-6 weeks!

Enter your name above to digitally sign off on this form.