Solar Heater Installation Instructions for Soft Side Pools

To complete the installation of this solar heater, you will require these additional components depending on your pool set up

Installing Multiple Solar Heaters On Your Soft Side Pool

40 mm Installation (Multiple Panels):

• 1 x 3 Way Valve: Available here for purchase.
• 1 x 3 Way Threaded Tee (Dura Fitting Code: 405-015 - Not Available Through Pool Supplies Canada)
• 2 x 40mm Hose Connectors: Available here for purchase.
• 2 x 40 mm Hose Sections: Available here for purchase.

32 mm Installation (Multiple Panels):

• 1 x 3 Way Valve: Available here for purchase.
• 1 x 3 Way Threaded Tee (Dura Fitting Code: 405-015 - Not Available Through Pool Supplies Canada)
• 2 x 1.5" to 32mm Connectors: Available here for purchase.
• 2 x 32 mm Hose Sections: Available here for purchase.

Standard 1.5" Barb Installation (Multiple Panels):

• 1 x 3 Way Valve: Available here for purchase.
• 1 x 3 Way Barbed Tee: Available here for purchase.
• 2 Sections of Standard 1.5" Hose (length of hose cut to fit)
• 3 x Dura Fitting 1436-015 (1.5" Male Threaded x Barb Fitting): Available here for purchase.

Standard 1.5" Glue Installation (Multiple Panels):

• 1 x 3 Way Valve: Available here for purchase.
• 1 x 3 Way Non-Threaded Tee Available here for purchase.
• 2 Sections of Standard 1.5" Hose (length of hose cut to fit)

Installing A Single Solar Heaters On Your Soft Side Pool

40 mm Installation (Single Panel):

• 1 x 40mm Hose Connectors: Available here for purchase.
• 1 x 40 mm Hose Sections: Available here for purchase.

32 mm Installation (Single Panel):

• 1 x 1.5" to 32mm Connectors: Available here for purchase.
• 1 x 32 mm Hose Sections: Available here for purchase.

Standard 1.5" Barb Installation (Single Panel):

• Standard 1.5" Hose (lengths of hose cut to fit)
• 2 or 4 x Dura Fitting 1436-015 (1.5" Male Threaded x Barb Fitting): Available here for purchase.