Order Toll Free

1.888.992.9952

Search
Free Shipping on Orders Over 199Free Shipping on Orders Over 199
  • Save 32%

Spa Pure Bromine Tablets (1.5 kg)

List price: $46.99  
$31.99
Your discount: $15.00 (32%)
03200C20SP
In stock
+

Spa Pure Brominating Tablets is a new form of brominating disinfectant for spa and hot tub water. It is easily adapted to many erosion feeders used to automatically treat both commercial and residential spas and hot tubs. When used as directed, Spa Pure Brominating Tablets will disinfect spa, and hot tub water, keeping it clear and free of odour.

Features:

  • Brominating disinfectant tablets for spas and hot tubs
  • Spa Pure Bromine Tablets provide the effectiveness of chlorine without the chlorine odour
  • Comes in a 1.5 Kg container

Directions for use:

Spa Pure Bromine Tablets (1.5 kg)

NOTE: Check the expiry date of the test kit as test results may be inaccurate if used after that date.

1. Maintain recommended daily levels as determined by the testing kit:

  • Free available bromine: 3.0 - 5.0 ppm
  • pH 7.2 - 7.8
  • Total alkalinity: 100 - 150 ppm
  • Calcium Hardness: 100-200 ppm

2. If using an automatic feeding device, fill the chamber(s) with tablets and adjust the flow rate, according to manufacturer’s recommendations, to maintain proper bromine residual. Adding tablets to the spa’s skimmer basket is an alternative bromine feed method. Daily usage should approximate 5 g Brominating Pucks per 1,000 L of spa water. NOTE: Heavy spa usage, and higher temperatures may require higher usage rates to maintain proper bromine residual.

3. Periodic superchlorination of spa water is recommended. Follow label instructions of superchlorination product being employed. NOTE: Persistent foam formation, turbid, or malodorous water are indicators of inadequate sanitizer levels. To correct such conditions, superchlorinate spa water by adding superchlorination product. Maintain circulation at least 30 minutes and wait 4 hours before using. The number of days between complete spa drainage is equal to the volume of spa water in litres, divided by 10 times the maximum number of daily spa users. Refill the spa with water and repeat directions of use. Maximum spa water usage temperature is 40°C. Duration in spa at 40°C should not exceed 15 minutes.

No posts found

Write a review

Customers Also Bought